Light Sensing 0-10V Infrared Remote Control Oads Lawns Courtyards Parks
The JL-712A2H light controller is a smart latch-type controller developed based on the Zhaga Book-18 interface standard. It combines light sensing and microwave sensing sensors, outputs 0-10V dimming signals, and supports infrared remote control for parameter configuration. Ideal for roads, lawns, courtyards, parks, parking lots, factories, warehouses, and various outdoor lighting applications.
When illumination requirements are met, the lamp operates at slightly bright brightness and begins a countdown. If motion is detected, the lamp becomes fully bright. After motion detection ends, a full-brightness countdown begins. When this countdown ends, the lamp returns to slightly bright mode. The lamp turns off when the slightly bright countdown ends or illumination requirements are no longer met.
- 12-24VDC power supply with low power consumption
- Zhaga Book-18 interface standard compatibility
- 0-10V dimming mode for precise control
- Dynamic microwave frequency adjustment to prevent interference in dense installations
- Compact size: Φ50.4 × 35mm, suitable for various lighting fixtures
- Light sensitivity + microwave sensing for on-demand lighting and energy efficiency
- Visible light filtered photosensitive sensor
- High-performance microwave with 15m hanging height and ≥10m induction radius
- Infrared remote control capability
- IP66 rated for outdoor durability
| Power Supply | Voltage: 12-24VDC Current: 12V/35mA; 24V/25mA |
|---|---|
| Power Dissipation | <0.385W (12V); <0.55W (24V) |
| Dimming | 0-10V |
| Sensors | Light sensitivity + microwave |
| Spectral Range | Wavelength: 800~1100nm |
| Microwave Frequency | 5.8GHz |
| Maximum Hanging Height | 15 meters |
| Induction Radius | ≥10 meters |
| Power On Initialization | Default remains on for 5s (gradient) when powered on, then runs based on parameter settings and environment conditions |
| Sensitivity | Default 80%, adjustable via IR |
| Hold Time | Default 30S, adjustable via IR |
| Stand-by Dim Level | Default 0%, adjustable via IR |
| Stand-by Period | Default infinite, adjustable via IR |
| Turn On Illuminance | Default 50lux, adjustable via IR |
| Turn Off Illuminance ∆ Value | Default ∆ 50lux, adjustable via IR |
| Turn Off Illuminance | Turn On Illuminance + Turn Off Illuminance ∆ Value |
| Maximum Power Ratio | Factory default 100%, adjustable via IR |
| Off → Stand-by Dim Time | 0.1S |
| Stand-by Dim → 100% Dim Time | 0.1S (when stand-by dim level is 0%, lasts for 0.2s) |
| 100% Dim → Stand-by Dim Time | 8S (when stand-by dim level is 0%, lasts for 9s) |
| Stand-by Dim → Turn Off Time | 1S |
| Mechanical Vibration | IEC60068-2-6 |
| Flammability Level | UL94-V0 |
| Operating Temperature | -40℃~70℃ |
| Storage Temperature | -40℃~85℃ |
| Operating Humidity | 5% RH~99% RH |
| IP Level | IP66 |
| Certifications | CE, ZHAGA, ROHS |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.