Special Stainless Steel

Martensite Aging Hardening Special Stainless Steel Hot Rolled Rod UNS S46500 Similar models: UNS S46500, Alloy 465 Martensite Aging Hardening Special Stainless Steel Hot Rolled Rod UNS S46500 UNS S46500 is a martenite precipitation-hardened stainless steel, this steel type has extremely high strength, excellent toughness and corrosion resistance. UNS S46500 stainless is a premium melted, martensitic, age-hardenable alloy capable of ultimate tensile strength in excess of 250

High Elasticity Martensite Stainless Steel Maraging300 Rod Forging Cold Wire Introduction Maraging 300 is a 18% nickel, cobalt strengthened steel (C-type), with excellent mechanical properties, workability and heat treatment characteristics. It is also called 18Ni300. Applications Typical applications for maraging include missile and rocket motor cases, landing and takeoff gear, munitions, aerospace, extrusion tooling, die casting, high performance shafting, gears and

Special Stainless Steel UNS S31673 Wire Strip Rod For Surgical Implants 316LVM is a variety of grade 316 stainless steel,316LVM goes through a process of electric arc melting, followed by vacuum arc remelting that results in a highly uniform chemistry that contains a minimal amount of impurities. Due to its lack of contaminants and high resistance to corrosion, 316LVM is commonly used in temporary and permanent medical implants (sutures, surgical staples and bone pins) and

Stell AerMet®100(AMS 6532) AerMet 100 is a martensitic stell alloy characterized by ultra-high strength. The property of this alloy comes directly from the robust crystalline structure that’s a characteristic of almost every martensitic alloy. The main advantages of Steel AerMet 100 are superior fracture toughness and ductility, excellent fatigue and stress corrosion cracking resistance, and high fatigue strength. The Steel AerMet 100 is not a corrosion resistance alloy,

Custom 465 Martenite Precipitation Hardened Stainless Steel Bars S46500 High Strength for Surgical Applications Custom 465(UNS S46500) stainless is a premium melted, martensitic, age-hardenable alloy capable of ultimate tensile strength in excess of 250 ksi in the overaged (H 950) condition. This alloy was designed to have excellent notch tensile strength and fracture toughness in this condition. Overaging to the H1000 condition provides a superior combination of strength,

Aremet 100 Martensitic Stainless Steel Alloy A-100 with Ultrahigh Strength AerMet 100 is an Ultrahigh Strength type of Martensitic Steel Alloy, It has a very hard form of steel crystalline structurewas and developed in response to a need for a stronger and tougher material with superior fracture toughness and ductility. The minimum tensile strength of the alloy is 280 ksi (1930 MPa). Due to the alloy is not a corrosion-resistant alloy, the sealing must be performed if used in

Age Hardening Special Stainless Steel Custom 465 Hot Rolled Rod Round steel Custom 465 is a martenite precipitation-hardened stainless steel, this steel type has extremely high strength, excellent toughness and corrosion resistance. Custom-465 has been widely used in the medical device industry, because of its extremely excellent strength and toughness, allowing the device to withstand great torque during surgery. The unique performance of Custom465 stainless steel makes it

18Ni300 Martensite Stainless Steel Rod forging Cold Rolled Strip Introduction 18Ni300 is a 18% nickel, cobalt strengthened steel (C-type), with excellent mechanical properties, workability and heat treatment characteristics. Product Name Martensite Stainless Steel Model 18Ni300 Diameter range 6-300mm Forms Rod, forging, cold rolled strip, cold wire Equal grade Maraging 300,C300 Certification ISO 9001:2015 Applications Typical applications for maraging include missile and

Custom 465 Martensite aging hardened stainless steel for air industry, medical devices, manual tools Custom 465 is a martensite aging hardened stainless steel, this steel type has extremely high strength, excellent toughness and corrosion resistance. Custom465 was first used in the air industry in 1997. It was then widely used for aircraft structural components, such as engine fittings, aircraft flaps rails, actuators, landing gear components, and similar components. Due to

S45500 Martensitic Age-hardenable Stainless Steel Per AMS 5617 Alloy 455 S45500 is a martensitic, age-hardenable stainless steel. This alloy represents a significant advancement in the area of preciptiation hardening stainless steels. S45500 has three times the yield strength of standard 304. It lends itself well to heat treatment and fabrication, has exceptionally high yield strength, good ductility and toughness. S45500 resists staining in normal atmospheres and shows no

XM-13 Precipitation Hardening Stainless Steel per ASTM A564 Bright Round Bar PH 13-8 Mo is a precipitation hardening stainless steel that combines excellent strength, good toughness, and good general corrosion resistance. It is a through-hardening alloy, which allows it to be used in parts with large cross sections, where yield strengths in excess of 200 ksi. (1,380 MPa) may be required. Good transverse toughness properties are achieved by tight chemical composition control

PH13-8Mo Excellent Strength Good Toughness and General Corrosion Resistance S13800 PH 13-8 Mo is a precipitation hardening stainless steel that combines excellent strength, good toughness, and good general corrosion resistance. It is a through-hardening alloy, which allows it to be used in parts with large cross sections, where yield strengths in excess of 200 ksi. (1,380 MPa) may be required. Good transverse toughness properties are achieved by tight chemical composition

XM-13 Precipitation Hardening Stainless Steel per ASTM A564 Bright Round Bar Character of 316L modified The alloy is designed for urea applications (low carbon and silicon contents). The 316L Modified grade can be welded with most of the welding processes: TIG, Plasma, MIG welding, as well as SMAW, SAW or FCAW processes. The alloy is sensitive to hot cracking phenomenon due to its fully austenitic microstructure. Weld should be performed in order to obtain extra-low ferrite

AMS 5525 S66286 Stainless Steel Round Bar High Strength and Oxidation Resistance A precipitation hardening stainless steel, UNS S66286 maintains superior strength at high temperatures up to 700°C, surpassing austenitic stainless steels. With a higher nickel content than Type 304, NAS 660 also includes such elements as titanium and aluminum for hardening. Age hardening is used to precipitate ’ phase [Ni3 (Al, Ti)] making this an extraordinarily strong metal at high temperature

725LN 25-22-2 Special Stainless Steel Seamless Pipe for Urea Applications A-ONE ALLOY has rich experience of supplying 725LN Urea Grade stainless steel in forms of forging, round bar, plate, seamless pipe and so on. We provide test certificate per ASTM A262 standard. Stainless steel grade 725LN is a fully austenitic stainless steel that does not have intermetallic phases such as intergranular carbide precipitations. The 310MoLN steel grade has an optimized chemical compositio

310MoLN Stainless Steel Excellent Resistance to Intergranular Corrosion S31050 A-ONE ALLOY has rich experience of supplying 310MoLN Urea Grade stainless steel in forms of forging, round bar, plate, seamless pipe and so on. We provide test certificate per ASTM A262 standard. Stainless steel grade 310MoLN is a fully austenitic stainless steel that does not have intermetallic phases such as intergranular carbide precipitations. The 310MoLN steel grade has an optimized chemical

1.4418 Soft Martensitic Chromium-Nickel-Molybdenum Stainless Steel 1.4418 is characterised by its very good resistance to corrosion in aggressive media coupled with very good mechanical and impact properties. 1.4418 is specifically designed to combine high mechanical strength and toughness, with improved corrosion resistance compared to the traditional martensitic and martensitic precipitation grades. This grade exhibits very good erosion-corrosion resistance or cavitation

S46500 Age-Hardening Special Stainless Steel Bars and Shapes S46500 stainless is a premium melted, martensitic, age-hardenable alloy capable of ultimate tensile strength in excess of 250 ksi in the overaged (H 950) condition. This alloy was designed to have excellent notch tensile strength and fracture toughness in this condition. Overaging to the H1000 condition provides a superior combination of strength, toughness and stress corrosion cracking resistance compared with

GH2132 Stainless Steel for Application ranges from -253°C to 650°C GH2132 is a Fe-Ni-Cr based precipitation-hardened superalloy, working temperature range -253°C~650°C. The alloy has good low/high temperature strength and long time stability, good corrosion resistance and thermal deformation properties, good machining ductility and satisfactory welding performance. GH2132 is suitable for manufacturing high temperature bearing components such as turbine disc, compressor disc

Alloy 28 with Excellent Resistance to Reducing and Oxidizing Acids Alloy 28 (UNS N08028, W. Nr. 1.4563) is a nickel-iron-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localise attack such as pitting and crevice corrosion. The alloy are especially resistant to sulphuric and phosphoric acid. Used for chemical processing, pollution control equipment, oil and gas well