Oilfield Swab Cups

Product Introduction The 2.5 inch SV swab cup is a molded rubber component for well-service fluid lifting. This page focuses on replacement selection for sand- and silt-bearing fluids: compare the lip profile, cup dimensions and core arrangement with the installed assembly. Include solids content, fluid composition and operating temperature with your inquiry so that material and fit can be reviewed for the intended service. Technical Specifications Nominal Size: 2.5 Inch

Steel-Core Swab Cup Maintenance: Wear Conditions and Replacement Fit Royal Way supplies steel-core swab cup enquiries for downhole fluid lifting. Review the rubber compound and cup profile for the tubing condition, sand exposure and operating fluid. Confirm core dimensions and mandrel fit separately. A cup has no independent 10,000 psi working-pressure rating. The existing catalogue introduces TA, V and MV profile references with different support and lip arrangements.

TA Oilfield Swab Cups for Operating-Condition Selection This TA swab cup listing covers medium and light load oilfield swabbing enquiries. Select the cup dimensions, core arrangement and rubber formulation for the actual fluid, tubing and operating conditions. Material Rubber with metal or aluminum core; NBR, HNBR or FKM by compound enquiry Size 2-7/8, 3-1/2, 2, 2-1/2, etc Feature Compound and core configuration selected for specified fluid, temperature and load Color Black

Product Introduction This 4.5-inch V-style oilfield swab cup listing identifies a flexible lip and steel-reinforced base for compatible casing or large-bore tubing applications. The range table below gives catalog reference dimensions, including a 4-1/2-inch steel-core row with a 4.062-inch cup OD and 2.495-inch cup ID. Confirm the exact cup profile, bore, mandrel interface, compound grade and operating conditions against the applicable drawing or sample before ordering.

Product Description: Oilfield tubing swab cups are selected for fluid-lifting operations using the actual tubing bore, cup profile and mandrel arrangement. Pressure and load limits are confirmed for the complete tool configuration and intended well duty. Color Options: The swab cup is available in a standard black color, but custom color options are also available to meet specific preferences or requirements. Hardness: Compound hardness is specified against fluid compatibilit

Product Description: V-type NBR rubber swab cups are fitted to the specified swab mandrel for well-fluid lifting. Confirm the cup profile, OD, ID, height and assembly fit. Pressure and load limits must follow the confirmed cup and complete swab assembly specification. For OEM or ODM cups, provide the replacement drawing or sample, compound requirements and reinforcement details. Custom dimensions are reviewed against the intended mandrel and tubing bore. We offer free samples

TA Swab Cups for 2.875-inch Tubing References and Sand-Bearing Service For medium-load sand-bearing service in the 2.875-inch tubing size reference, specify the TA replacement cup profile and actual tubing bore. The existing 2-7/8-inch catalog rows list a 2.431-inch cup OD and 1.370-inch cup ID for steel or aluminum cores; confirm these dimensions, height and mandrel fit against the individual drawing. The specified aluminum or steel bushing must match the individual cup

Product Introduction This 2-1/2-inch RTL type oilfield swab cup is listed for medium-to-light-load swabbing assemblies. Its dual-lip profile and metal core define this configuration; compare cup outside diameter, core opening and seating dimensions with the tubing and mandrel drawing before ordering. The listing identifies nitrile rubber (NBR) with a hardness range of 80 to 90 Shore A. Confirm the selected compound and dimensions against the well fluids and planned operating

MV Style Swab Cups for Sand-Bearing Fluids: Wear and Fit Selection Available types of Swab cups: TA style: A medium-load cup built around a steel or aluminum bushing. Confirm the tubing bore, mandrel fit and required load range before selecting the cup; compound and dimensions must match the actual well conditions. MV style: MV-profile cups use multiple upturned lips around a steel or aluminum bushing. For a replacement in sand-bearing fluids, confirm the lip profile, OD, ID,

Nitrile Swab Cups for Heavy-Wall Tubing: TA, V and MV Profile Selection For heavy-wall tubing, specify the actual bore and minimum restrictions when selecting a TA, V or MV replacement swab cup with a compound matched to the produced fluid, sand content and temperature. The specified aluminum or steel bushing must match the individual cup drawing and mandrel. Multiple upturned lips are associated with the MV profile; confirm each profile separately rather than applying one

2-7/8-inch Steel-Core TA Swab Cups: Replacement Dimensions and Mandrel Fit For a 2-7/8-inch steel-core replacement, compare the existing cup drawing with the TA cup profile and the mandrel dimensions. The original catalog lists the 2-7/8-inch steel-core cup at 2.431-inch OD and 1.370-inch ID; tubing reference size is not the cup diameter. Confirm cup height and bushing fit before ordering. The specified steel bushing must match the specified profile and mandrel. Send the worn

TA Rubber Swab Cups for Medium-Load Well Fluid Lifting Sand-Bearing Fluid Service and Compound Selection TA Profile with Steel or Aluminum Core TA rubber swab cups with steel or aluminum cores are offered for medium-load well-fluid lifting. For sand-bearing service, specify the fluid composition, solids content and tubing condition so that the compound and cup arrangement can be selected. Match the cup outside diameter, height, bushing bore and mandrel fit to the original

Product Description: V-type oilfield swab cups lift well fluids in the specified swab assembly. Confirm compound compatibility using the actual fluid formulation and operating temperature. For crude oil or condensate service, provide the fluid composition, temperature and lifting load before selecting the cup. Suitability depends on the compound and complete assembly. For well-fluid swabbing during completion or workover, confirm the tubing bore, restrictions and mandrel fit.

V Series Swab Cups for Compound and Tensile Property Enquiries Shanghai Qinuo offers V-series swab cup enquiries for the required tubing fit and duty configuration. Specify the selected rubber compound and any tensile or abrasion requirements with the cup drawing. The existing dimension table identifies steel-core references that must be matched to the actual mandrel. For frac-fluid service, agree the compound specification and relevant abrasion, tensile and fluid-compatibili

TA, V and MV Rubber Swab Cups — Tubing Maintenance Replacement Selection Product Description Tubing Maintenance Orders: Match the Replacement Cup to the Existing Tool Maintenance order detail Information needed Existing cup Provide TA, V or MV part number, profile drawing and revision or a measured sample. Tubing passage Identify actual bore and minimum restriction; distinguish tubing references from cup dimensions in the old size table. Mandrel and bushing Confirm bore, core

Product Description: V-type oilfield swab cups for replacement and OEM/ODM procurement. Specify the matching mandrel, cup geometry and well-fluid conditions to confirm the replacement configuration. Features: Product Name: Oilfield Swab Cups Pressure Rating: Operating limits per confirmed cup and swab assembly specification Custom: Available OEM/ODM Nearest Port: Shanghai Compatibility: Fluid compatibility per selected compound and actual formulation Original: Shanghai China

Product Introduction The 4.5-inch V-style oilfield swab cup is listed for well servicing in compatible casing or tubing where sand and suspended solids may be present. This configuration is identified by a flexible lip and steel-reinforced base. Selection for sand service depends on particle size and concentration, fluid, bore condition and assembly; specify these conditions when evaluating a replacement. 4.5-Inch Reference Dimensions: The legacy range table lists 4.062-inch

Product Introduction Optimized Fluid Lifting with 2 1/2" SV Type Swab Cups The 2 1/2" SV style swab cup is a rubber and metal-core component for light to medium fluid lifting during well servicing. This listing brings together material options for selecting a replacement cup against the actual well fluid, temperature and existing assembly. Confirm the SV profile and mounting dimensions against a drawing or sample before ordering. NBR, HNBR and FKM options require compound

Custom Durable Wear Resistant MV Style Oilfield Rubber Swab Cups MV style rubber swab cups: A metal bushing supports multiple upturned rubber lips. For replacement after wear, confirm the original profile, finished cup OD, bushing bore and overall height. Check the actual tubing internal diameter and mandrel before choosing a replacement. Related cup types: TA and V are separate profiles shown in the existing range. TUF and NUF references below also require their own geometry

TA Rubber Swab Cups for Medium-Load Well Fluid Lifting Compound Selection for Sand-Bearing Wells Steel or Aluminum Core and Replacement Dimensions TA rubber swab cups with steel or aluminum cores are offered for medium-load well-fluid lifting. For sand-bearing wells, provide produced-fluid composition, solids content and operating temperature to select the rubber compound. Match the replacement cup outside diameter, height, bushing bore and core material to the original