Oilfield Swab Cups

Product Description: This listing covers V type tubing swab cups with a rubber sealing body and metal core. Nitrile and other compound options are reviewed against the well fluid, sand content and operating temperature. Confirm the V profile and tool fit separately from TA or MV cups. Features: Product Name: Oilfield Swab Cups Feature: Rubber sealing profile Compound selection by well fluid Metal core mounting fit Temperature duty reviewed with enquiry Finished dimensions by

Product Introduction The 2 1/2" SV style swab cup is an NBR rubber and metal-core component for fluid recovery during well servicing. This version is intended for enquiries involving oil exposure and abrasive wear. Specify the fluid composition, operating temperature, sand content and existing cup dimensions so the compound and fit can be confirmed. The SV sealing profile contacts the tubing wall during lifting. The 2.5-inch designation is nominal: actual tubing inside

OEM TA Swab Cups for Drawing and Sample-Based Replacement TA Type Swab Cup with Metal or Aluminum Core This TA swab cup listing supports OEM replacement enquiries for medium and light load swabbing. Use an equipment drawing or an identified reference sample to agree cup profile, mandrel fit, core construction and rubber compound before ordering. TA Swab Cup Sample Matching and Drawing Review Supply a labelled sample or dimensioned drawing showing cup outside diameter, bore,

TA Oilfield Swab Cups for Tubing Size Selection TA Type Swab Cup with Metal or Aluminum Core This TA swab cup listing covers medium and light load swabbing enquiries across the listed tubing size references. Confirm the cup outside diameter, core bore and rubber compound for each selected equipment configuration. TA Cup Selection Across Listed Tubing Size References The existing size list includes 2-7/8, 3-1/2, 4-1/2 and 5-1/2 inch references. These references must be paired

Custom Durable Wear Resistant MV Style Oilfield Rubber Swab Cups MV style swab cup: The MV profile uses multiple upturned rubber lips around a steel or aluminum bushing. Match the lip profile, outer diameter, bore and height to the original mandrel and tubing internal diameter. Specify the bushing material on the drawing; a shared nominal size does not establish interchangeability. Other range references: TA and V are separate cup profiles. Confirm their actual dimensions and

TA type oilfield rubber swab cups TA Swab Cup Fit: Match Tubing Bore, Bushing and Medium-Load Duty Enquiry item Selection detail Profile TA / Type A cup drawing and tool reference; V and MV are separate profiles. Tubing reference Listed 2-3/8, 2-7/8 and 3-1/2 inch references; provide actual tubing ID and weight or bore specification. Bushing Steel or aluminium requirement, bore, height and mandrel fit. Rubber compound Actual fluid, temperature and solids content for grade

Custom TA Oilfield Swab Cups by Drawing and Compound Specification TA Type Swab Cup with Metal or Aluminum Core This TA swab cup listing covers custom enquiries for medium and light load swabbing. Agree cup geometry, core material and rubber compound against the equipment drawing and actual well conditions before production. Custom TA Cup Geometry and Compound Approval For a custom TA cup, supply the outside diameter, height, core bore and retaining geometry with the drawing

Nitrile MV Swab Cups with Steel or Aluminum Bushings Shanghai Qinuo offers MV swab cup enquiries in nitrile and other specified rubber compounds. The cup has a steel or aluminum bushing with multiple upturned lips. Check lip dimensions, tubing clearance and bushing bore for the actual mandrel, and specify suspended sand content for material review. MV Swab Cup Outside Diameter and Bushing Bore Selection The existing dimensional table lists cup OD and ID in inches for steel

TA-Style Rubber Swab Cups for 3-1/2-inch Nominal Tubing For Well Swabbing Operations For a TA-style cup used with 3-1/2-inch nominal tubing, confirm the actual tubing internal diameter and the cup drawing before ordering. Match cup outside diameter, height, bushing bore and mandrel fit. The rubber body and steel or aluminum core must be selected together for the intended medium-load swabbing conditions. Specify produced fluid, suspended solids, operating temperature and

Product Description: Shanghai Qinuo Industry Co.,Ltd. provides V type, MV type, TA type Rubber Swab Cup. These various types of swab cups are designed to meet different well conditions, ensuring reliable performance under various operational circumstances. 2" TA Type Swab Cup TA style is described here as a medium-load swab cup with a steel or aluminum bushing. This page focuses on the 2-inch size reference. Confirm the bushing material, mandrel fit and finished rubber

Product Introduction The 2.5 inch SV swab cup is a rubber-and-metal-core component for oilfield fluid recovery. Its flexible lip profile is a key selection feature for light-to-medium-load swabbing with sand-bearing fluids. Compare the lip geometry, core bore and seating dimensions with the existing assembly; include fluid composition, solids content and operating temperature when specifying the replacement. Technical Specifications Product Type SV Type Swab Cup Nominal Size

Product Description: V-type swab cups fit the specified mandrel for well-fluid lifting. The listed references include 2-7/8, 3-1/2, 4-1/2 and 5-1/2 inches; confirm the actual tubing bore, cup OD, ID and height from the replacement drawing. Request a product sample to check fit and compound requirements before a production order. For fluid-removal service, select the cup profile and NBR compound from the fluid formulation, solids content, temperature and required operating

TA-Style Rubber Swab Cups for Downhole Fluid Swabbing TA-style rubber swab cups use a steel or aluminum core for the selected medium-load configuration. For replacement selection, provide the original part reference and confirm actual tubing bore, cup OD, ID, height and mandrel fit. The size references below include different naming conventions and must be matched to a drawing; a full-size description alone does not define fit or availability. Specify produced fluid,

Product Introduction The Professional 5 1/2 inch V Style Swab Cup is an engineered downhole solution designed specifically for light load fluid recovery in large-bore casing and tubing operations. This model utilizes a fluid-actuated sealing lip that expands outward as hydrostatic pressure increases, supporting contact with the bore when the cup dimensions and service conditions are suitable. Its primary advantage lies in its stackable architecture, allowing operators to

TA Rubber Swab Cups with Steel or Aluminum Cores for Bulk Replacement Orders For bulk procurement of TA rubber swab cups, identify the replacement profile and drawing before comparing quotations. Specify steel or aluminum core, cup outside diameter, height, sleeve bore and required quantity for each size. Select NBR, HNBR or FKM according to fluid compatibility, sand content and operating temperature. Wear performance depends on the compound, tubing condition and swabbing

TA Type Nitrile Swab Cups for Specified Tubing and Load Conditions TA type swab cup enquiries are matched to the tubing inside diameter, mandrel and bushing drawing. Specify the nitrile compound and intended fluid-lifting conditions. TA, V and MV references describe separate cup designs and require individual selection. 2" TA Type Swab Cup The retained TA description identifies a medium-load cup with a steel or aluminum bushing. Confirm bushing material, mounting dimensions

Custom Nitrile TA, V and MV Swab Cups for Heavy-Wall Tubing For custom cups in heavy-wall tubing, provide a drawing or sample identifying the TA, V or MV profile and specify tubing bore, cup outside diameter, height and mandrel fit. Select the rubber compound for fluid composition, sand content and temperature. The specified aluminum or steel bushing must match the individual cup drawing and mandrel. Multiple upturned lips are associated with the MV profile; confirm each

TA Swab Cups with Aluminum or Steel Cores for Medium-Load Well Fluid Lifting This TA swab-cup listing offers rubber cups with aluminum or steel cores for medium-load well-fluid lifting. Specify the required core material when ordering and match the sleeve or bushing bore to the mandrel. Confirm cup outside diameter, overall height and assembly clearance from the replacement drawing rather than selecting by nominal tubing size alone. Choose the rubber compound for the produced

Product Introduction This 2-1/2 inch RTL swab cup listing covers a rubber-and-metal replacement configuration for well service. The existing specification lists NBR with an 80-90 Shore A range. Confirm the required grade, profile and mandrel dimensions for the order; hardness alone does not establish load capacity. For deep-well maintenance, include the fluid, temperature, bore condition and observed wear with the replacement request. Technical Specifications Material: High

Product Description: V-type swab cups are fitted to the specified mandrel for well-fluid lifting. Product samples can be requested for dimensional and fit review; the cup itself is not a well-fluid testing instrument. Confirm OD, ID, height, profile and mandrel dimensions before ordering. For swabbing during a specified completion or workover operation, provide the tubing bore, restrictions, fluid formulation, solids content, temperature and required lifting load. Select the