Oilfield Swab Cups

Customizable TA Swab Cups: Drawing and Compound Requirements Customizable TA-style cups are intended for medium-load well-fluid swabbing. Send the existing cup drawing or sample with OD, ID, height, bushing dimensions and mandrel fit. Specify steel or aluminum core and the required rubber compound. Provide fluid composition, solids, operating temperature, tubing bore and restrictions so the replacement can be matched to the intended assembly. Custom dimensions and compound

TA Rubber Swab Cups with Steel or Aluminum Sleeves for Replacement Swab Assemblies​ TA rubber swab cups with steel or aluminum sleeves are intended for medium-load well-fluid lifting. When replacing cups on an existing swab assembly, confirm the sleeve bore, seating arrangement and required number of cups together with cup outside diameter and height. Match the rubber compound to produced-fluid composition, solids content and continuous or intermittent operating temperature.

TA Swab Cups for Replacement and Custom Drawing Orders This TA swab cup listing covers replacement and custom drawing enquiries for medium and light load swabbing. Confirm the rubber profile, metal or aluminum core and dimensions against the existing mandrel and tubing before ordering. Material Rubber with metal or aluminum core; NBR, HNBR or FKM by compound enquiry Size 2-7/8, 3-1/2, 2, 2-1/2, etc Feature Compound and core configuration selected for specified fluid,

Product Description: The V type rubber swab cup is a replaceable component for oilfield fluid-lifting and well-cleanout assemblies. Specify the rubber compound, core construction and mandrel fit for the intended service. The existing 4.5-inch, 5.5-inch and 7-inch references are nominal size options; confirm the actual bore and finished cup dimensions with the drawing. Key Features: 1.V type cup selection for the specified wellbore cleanout assembly 2.Rubber compound and core

3-1/2-inch RTL Series Swab Cup: Fluid Compatibility and Replacement Fit Product Introduction Shanghai Qinuo offers swabbing cups for oilfield fluid removal. For the 3-1/2-inch RTL series reference, match the cup profile, OD, ID, height and reinforcement to the replacement drawing and mandrel. Confirm whether the stated size denotes tubing or the finished cup. Select a suitable NBR, HNBR or FKM compound using the actual oil or treatment-fluid formulation, additives, solids and

3-1/2-inch TA Swab Cups with Aluminum or Steel Bushings for Sand-Bearing Fluids For 3-1/2-inch tubing references and sand-bearing fluids, select the TA cup profile with a compound matched to the fluid. The retained catalog lists the 3-1/2-inch row at 2.985-inch cup OD and 1.370-inch cup ID for aluminum and steel cores; confirm the actual bore, cup height and mandrel fit. The cup has either an aluminum or steel bushing according to the specified assembly. Provide sand

TA Rubber-Metal Swab Cups for Medium-Load Well Fluid Lifting TA rubber-metal swab cups are intended for medium-load well-fluid lifting. Sealing performance depends on cup fit, rubber condition, compound selection and the tubing surface. For a replacement cup, confirm outside diameter, height and sleeve bore against the mandrel assembly and actual tubing bore. Provide fluid composition, sand content, temperature and the required cup arrangement when ordering. Steel or aluminum

TA Rubber and Metal-Core Swab Cup Selection This TA swab cup listing covers rubber and metal-core selection for medium and light load swabbing. Specify steel or aluminum core, cup dimensions and the operating conditions for the intended tubing and mandrel. Material Rubber with metal or aluminum core; NBR, HNBR or FKM by compound enquiry Size 2-7/8, 3-1/2, 2, 2-1/2, etc Feature Compound and core configuration selected for specified fluid, temperature and load Color Black or

Swab Cup Selection: Tubing Fit, Core Bore and Operating Duty Royal Way supplies rubber swab cups for equipment-defined oilfield swabbing operations. Select the cup profile, outside diameter and bushing bore for the tubing and mandrel. NBR or FKM compound enquiries require review of the actual fluid and temperatures; the cup alone has no independent 10,000 psi working-pressure rating. The existing range introduces TA, V and other swab cup profiles with different load and

Product Description: The 2-inch TA type nitrile rubber swab cup is offered for oilfield swabbing spare-parts orders. Match the NBR compound and metal-core construction to the existing mandrel and approved drawing. Specify fluid composition and operating conditions when confirming the replacement; the type and nominal size alone do not establish fit or a service rating. 2" TA Type Swab Cup Specifications: Product Name: Swab Cup Type: TA Type Sample: Available Pressure

Product Description: Shanghai Qinuo Industry Co.,Ltd. provides V type, MV type, TA type Rubber Swab Cup. These various types of swab cups are designed to meet different well conditions, ensuring reliable performance under various operational circumstances. 2" TA Type Swab Cup TA Style is a medium load Swab Cup built around a steel or aluminum bushing for use with a confirmed tubing or drill-pipe and mandrel fit. When under load, it will compress to form a solid rubber mass to

7-Inch V-Type Downhole Swab Cup — Well-Fluid and Tool Selection Product Description Downhole V Cup Enquiry: Define Well Conditions Before Compound Selection Well or tool detail Specification for review Working passage Provide actual bore, minimum restriction and cup dimensions for the 7-inch reference. Tool assembly Identify mandrel, iron-core bore, retaining arrangement and cup profile drawing. Fluid exposure Identify oil, water, additives and solids; select a rubber grade

Royal Way TA Swab Cups for Fluid and Thermal-Cycle Selection TA Cup Compound Review: Combine Oil Exposure with the Temperature Cycle A TA cup enquiry for oil and heat exposure needs the exact well fluid and temperature history. Select the rubber grade and bushing with the approved profile; a nominal tubing size or colour does not establish heat or chemical resistance. Service detail Information to provide Fluid Oil, water, treatment additives and solids content for compound

Product Description Oilfield pipe wipers remove adhering drilling mud and residue from the outside of tubulars during retrieval. Select the wiping opening, outside dimensions and support interface against the actual pipe and tool-joint measurements. Compound suitability depends on the mud formulation, additives, temperature and rubbing duty. Surface wiping assists mud handling but does not provide well-pressure containment. Key Features Multi-Fluid Compatibility: Review the

The existing range lists steel- and aluminum-bushing swab cups with nominal tubing references of 2-3/8, 2-7/8 and 3-1/2 inch. Confirm the actual TA or other profile against the original drawing; descriptions of multiple lips should not be used to identify a different profile solely by appearance. Match cup OD, bore, axial dimensions and compound to the mandrel and working tubing. Nom. OD (inch) Core and Description Cup OD Cup ID 2-3/8" (2") Aluminum Core Swab Cup 1.992" 1.120

TA Swab Cups for 2-7/8-inch and 3-1/2-inch Size References This TA swab-cup listing focuses on 2-7/8-inch and 3-1/2-inch size references for medium-load well-fluid lifting. Confirm the tubing size convention and actual cup outside diameter, height and bushing bore before selecting a replacement. For oil-bearing or elevated-temperature service, specify fluid composition and continuous or intermittent temperature so the NBR, HNBR or FKM compound can be selected. Heat and oil

Adjustable TA Style Swab Cups for Variable Well Conditions Versatile Fluid Lifting Solutions by SHQN – Precision Engineered for Oilfield Excellence TA style swab cups are replacement components for fluid lifting during well swabbing. Select the cup for the actual tubing internal diameter, mandrel and fluid duty. Changes in fluid column, temperature or sand content should be reviewed when choosing the compound and cup arrangement. Our ISO 9001 quality management supports

Product Description: This 2-inch TA type rubber swab cup is offered as a replacement component for well-servicing swab assemblies. Specify the mandrel drawing, actual bore and operating duty for rig maintenance orders. The listed 2 7/8-inch and 3 1/2-inch alternatives require their own dimensional approval; TA, V and MV type references do not establish interchangeable fit. 2" TA Type Swab Cup Specifications: Product Name: Swab Cup Type: TA Type Sample: Available Pressure

Product Description: This listing covers the V-type oilfield swab cup. Specify the V-type profile and matching mandrel when ordering; TA-type cups are separate configurations and should not be assumed interchangeable. Confirm the operating limits of the selected cup and complete swab assembly against the intended lifting load, temperature and fluid conditions. Compound and geometry determine suitability for the application. For OEM/ODM procurement, supply the cup drawing or

TA Style Swab Cups for 2-7/8 and 3-1/2 Inch Tubing References TA style swab cups are rubber sealing elements with a supporting core for swabbing service. This listing references 2-7/8 and 3-1/2 inch sizes and medium-to-light load applications. Match the cup profile, core and mandrel fit to the actual tubing bore and swab assembly; select the rubber compound for the fluid and temperature. TA Swab Cup Tubing Bore and Mandrel Fit The 2-7/8 and 3-1/2 inch references identify the