Daily Chemicals

Factory Direct Supply DL-Dithiothreitol DTT Powder 99% Cas 3483-12-3 With Antioxidant Effects Best Price Dithiothreitol, commonly known as DTT or dithiolthreitol, is a widely used reducing agent. It exhibits strong reducing power, largely due to the conformational stability of its oxidized six‑membered ring containing a disulfide bond. Its reducing ability is affected by pH as documented in Chemicalbook, and it only functions effectively at pH values above 7. This is because

Chlorhexidine Digluconate 20% is a broad-spectrum antiseptic liquid for dental mouthwash. Effective against bacteria, fungi, and viruses. Colorless, high-purity formula ensures safety and reliability for industrial and pharmaceutical applications.

Organic Ingredients 4-Chloro-3,5-Dimethylphenol CAS 88-04-0 Preservatives Disinfectants Introduction: Colorless crystals. Melting point: 115–116°C; boiling point: 246°C. At 20°C, 1 g is soluble in 3 L of water; soluble in 1 part of 95% ethanol; soluble in benzene, terpenes, non-volatile oils, and sodium hydroxide solution. Possesses a faint phenolic odor and is volatile with water vapor. Stable in hot water. Uses: Preservatives and biocides. Used in emulsions, cosmetics, inks

Cuprous Oxide CAS 1317-39-1 Ceramic Colouring Agent Crop Fungicide Introduction: Cupric oxide, chemical formula Cu₂O. Molecular weight 143.08. Deep red cubic crystals or orange-yellow crystalline powder, toxic. Occurs naturally as cuprite. Whilst stable in dry air, it gradually oxidises to copper oxide in moist air. Insoluble in water and ethanol, it dissolves in dilute sulphuric acid, undergoing disproportionation to form copper sulphate and metallic copper. Dissolution in

3,5-Dihydroxybenzoic Acid CAS 99-10-5 Synthetic Resin White Crystalline Powder Introduction: White or pale pink needle-like crystals. Melting point 232–233°C. Soluble in ethanol, diethyl ethe and hot water. Reacts with fuming sulphuric acid or hot concentrated sulphuric acid to form a purple-red compound. Reacts with ferric chloride to produce a wine-coloured precipitate. Uses: Used as an intermediate in organic synthesis for pharmaceuticals, synthetic resins, etc. Product

Colorless Liquid Benzyl Benzoate CAS 120-51-4 For Spices Benzyl benzoate is a clear, colorless, oily liquid with a light, balsamic odor reminiscent of almond and a sharp, pungent taste. It produces a sharp, burning sensation on the tongue. At temperatures below 178℃ it exists as clear, colorless crystals. Key Applications Benzyl Benzoate has seen use as an insecticide, as well as a solvent for various chemical reactions Used to prepare benzyl alcohol/benzyl benzoate (BABB)

White Powder Or Yellow Liquid Potassium Oleate CAS 143-18-0 Used For Casting And Spraying Processes Potassium Oleate is available as a gray-tan paste that is soluble in water and alcohol. This combustible compound serves multiple industrial functions. Key Applications Potassium Oleate functions as the potassium salt of oleic acid, serving as an effective binder, emulsifier, and anticaking agent in various industrial processes Used as a compound disinfectant in specialized

White Crystal Powder Antioxidant 168 CAS 31570-04-4 Phosphite Antioxidant Antioxidant 168 is a hydrolytically stable phosphite processing stabilizer. As a secondary antioxidant, it reacts during processing with hydroperoxides formed by autoxidation of polymers, preventing process-induced degradation and extending the performance of primary antioxidants. Key Applications Polyolefins and olefin-copolymers including polyethylene (HDPE, LLDPE), polypropylene, polybutene, and

Cyclohexanol CAS 108-93-0 Soap Stabiliser Leather Degreaser Colorless liquid Introduction: A colourless, oily, combustible liquid which crystallises into white crystals below its freezing point. Melting point 24°C (freezing point 25.15°C), boiling point 161.10°C, relative density 0.9493 (20/4°C), refractive index 1.4648, flash point (open cup) 67.2°C, viscosity (30°C) 41.067 mPa·s. Miscible with organic solvents such as ethanol, ethyl acetate, and linseed oil; slightly

Benzoic Acid CAS 65-85-0 FEMA 2131 Preservative White Powder Introduction: Flake-like or needle-like crystals. Possesses an odor of benzene or formaldehyde. Sparingly soluble in water; soluble in ethanol, methanol, benzene, carbon disulfide, carbon tetrachloride, and turpentine. Uses: Benzoic acid is commonly used as a pharmaceutical or preservative, exhibiting antifungal, antibacterial, and anti-mold properties. In medical applications, it is typically applied topically to

Neosperidin Dihydrochalcone CAS 20702-77-6 Sweetener Flavor Enhancer Introduction: A crystalline powder ranging from off-white to pale yellow, odorless. Its sweetness is approximately 1500 to 1800 times that of sucrose. The onset of sweetness is slightly delayed compared to sodium saccharin but significantly faster than glycyrrhizin (5:7:23 seconds). The duration of sweetness for the three compounds is 42:57:133 seconds, also falling between the other two, thus being closer

Colorless Liquid Diethyl Succinate CAS 123-25-1 Food Flavorings Colorless liquid with a pleasant odor. Melting point -20.6℃, boiling point 216.5℃, 105℃ (1.47kPa), relative density 1.0402 (20/4℃), refractive index 1.4198, flash point 90℃. Miscible with ethanol, insoluble in water. Product Specifications Product Name Diethyl succinate CAS 123-25-1 Molecular Formula C8H14O4 Molecular Weight 174.19 EINECS 204-612-0 Appearance Colorless liquid Product Image Applications Solvent

2,3-Butanediol CAS 513-85-9 Desiccant Plasticizer Synthetic Resin 2,3-Butanediol is an organic alcohol compound available as three stereoisomers: a chiral pair and a racemic mixture. This colorless liquid serves as a versatile reagent with applications across multiple industries. Product Overview Commonly employed as a chemical reagent, 2,3-Butanediol is sparingly soluble in water, ethanol, and similar solvents. It functions as a key precursor in the manufacturing of various

Ethyl Heptanoate CAS 106-30-9 FEMA 2437 Food Flavouring Agent Introduction: Ethyl heptanoate is a colourless, transparent liquid at room temperature with a pineapple-like aroma. It is soluble in organic solvents such as ethanol but insoluble in water. Uses: Ethyl heptanoate possesses a pineapple-like aroma and may be employed as a floral, fruity, tobacco, or alcoholic beverage flavouring agent. It also finds application in organic synthesis. Its primary uses include the

Silver Iodide (AgI) - Yellow Powder for Artificial Rainfall Research Silver iodide (CAS 7783-96-2) is a yellow, odorless, and tasteless powder that serves as an exceptionally effective ice crystal formation nucleus. This compound offers significant advantages for studying electrochemical interface properties and finds diverse applications across multiple industries. Key Applications Cloud seeding and artificial rainfall research through heterogeneous nucleation Medical

2-Acetylfuran CAS 1192-62-7 FEMA 3163 A premium food flavoring agent and organic synthesis raw material used in various industrial applications. Product Overview 2-Acetylfuran is a yellowish-brown liquid with distinctive aromas of almond, nuts, yeast, milk, and sweet caramel. This versatile compound serves as both a food flavoring agent and an important raw material for organic synthesis and pharmaceutical intermediates. Physical Properties Appearance: Yellowish-brown liquid

Daily Chemicals Sodium 2-ethylhexanoate Cas 19766-89-3 Polymerization Catalyst Introduction: Sodium isooctanoate exists as a solid at room temperature, with a density of approximately 1.089–1.098 g/ml and a melting point exceeding 300°C. It is produced by reacting octanol with solid caustic soda. For storage, keep sealed in a cool, dry place and avoid contact with oxidizing agents. Uses: Primarily used in the synthesis of isooctanoic acid and its calcium and magnesium salts.

Decyl Aldehyde (CAS 112-31-2) - Food Grade Flavoring Decyl Aldehyde is a colorless oily liquid with a distinctive aroma profile, widely used in food flavorings, fragrances, and industrial applications. This high-purity compound offers excellent stability and performance characteristics. Physical Properties Appearance: Colorless oily liquid Boiling Point: 207-209°C Relative Density: 0.825-0.829 Refractive Index: 1.427-1.430 Flash Point: 82°C Solubility: Soluble in equal volume

Daily Chemicals Sodium Polyacrylate Cas 9003-04-7 Corrosion Inhibitors Scale Inhibitors And Water Stabilizers. Introduction: Sodium polyacrylate is a white powder. It is odorless and tasteless. It is extremely hygroscopic. It is a polymer compound with both hydrophilic and hydrophobic groups. It dissolves slowly in water to form a very viscous, transparent liquid. The viscosity of its 0.5% solution is approximately Pa•s. Its viscosity is not due to water absorption and

Daily Chemicals ACES Cas 7365-82-4 Zwitterionic buffer Introduction: A white crystalline powder with a melting point above 220℃ (decomposition). Its saturated solution concentration is 0.22 M (0℃), and it is primarily used in biological buffering applications. Uses: Biological buffer; ACES is a zwitterionic buffer, with a saturated solution concentration of 0.22M (at 0℃). ACES binds to Cu2+, but not to Mg2+, Ca2+, or Mn2+. Product Name ACES CAS 7365-82-4 MF C4H10N2O4S MW 182