TIS680-10AB Waterproof And Air-Tight Two Part 1.5W/Mk Thermal Potting Compound Silicone For EV Electric Vehicle
Waterproof And Air-Tight Two Part 1.5W/Mk Thermal Potting Compound Silicone For EV Electric Vehicle
Products description
TIS®680-10AB is a two-component potting adhesive.When Component A and Component B are mixed in a specific ratio, the adhesive can cure and form into'shape either at room temperature or under heating conditions. After curing, it forms a dense elastomer with integrated performance characteristics: good thermal conductivity, electrical insulation, resistance to extreme temperatures, and anti-aging properties. It features low shrinkage rate, can closely adhere to various substrates, and effectively fills thegaps between electronic components. This product delivers comprehensive protection for electronic assemblies,including thermal conduction, insulation, waterproofing, shock absorption, flame retardancy, and mechanical safeguarding.
Feature
>Good thermal conductivity
>Good electrical insulation performance
>Controllable curing performance
>Flexibly adjustable mechanical properties
>Low viscosity facilitating gas release
>Excellent solvent and water resistance
>Excellent process compatibility
>Excellent resistance to extreme temperatures
Application
>New energy vehicle electronics
>Industrial electronics and power equipment
>Consumer electronics
>Medical electronics
>Aerospace electronic components
>Rail transit electronic equipment
>Marine detection equipment
| Typical Properties of TIS®680-10AB Series | |||
| Uncured Material Properties | |||
| Property | Value | Test Method | |
| Construction | Ceremic-fiiled silicone | - | |
| Color/Part A | White | Visual | |
| Color/Part B | Black | Visual | |
| Part A Viscosity (mPa.s) | 3500 | GB/T 10247 | |
| Part B Viscosity (mPa.s) | 3500 | GB/T 10247 | |
| Mix Ratio | 1:1 | - | |
| Shelf life (months) | 6 (Unopened) | - | |
| Cure Schedule | |||
| Pot Life @25℃ | 30 mins | Ziitek Test Method | |
| Cure @25℃ | 3 hours | Ziitek Test Method | |
| Cure @70℃ | 20 mins | Ziitek Test Method | |
| Cure Material Properties | |||
| Color | Gray White | Visual | |
| Hardness (Shore 00) | 65 | ASTM D2240 | |
| Density (g/cm³) | 1.73 | ASTM D792 | |
| Recommended Operating temperature (℃) | -45 ~200 | - | |
| Flame Rating | V-0 | UL 94 | |
| Thermal Conductivity (W/mK) | 1.0 | ASTM D5470 | |
| Breakdown Voltage (V/mm) | ≥7000 | ASTM D149 | |
| Dielectric Constant @1MHz | 4.2 | ASTM D150 | |
| Volume Resistivity (Ohm·cm) | ＞1.0x1012 | ASTM D257 | |
Instruction For Use
Product packaging:
1KG A/B for each tank.
5KG A/B each.
10KG A/B each.
Company Profile
Vietnam Ziitek Electronic Material Technology Co., Ltd. was established in 2006. Is a high-tech enterprise specializing in the research, development, production and sales of thermal interface materials. We mainly produce: heat-conducting joint filler, low melting point thermal interface materials, heat-conducting insulator, heat-conducting adhesive tape, heat-conducting interface pad and heat-conducting grease, heat-conducting plastic, silicone rubber, silicone rubber foam, etc. We adhere to the business philosophy of "survival by quality, development by quality", and continue to provide the most efficient and best service for new and old customers with excellent quality in the spirit of rigor, pragmatism and innovation.
Ziitek Culture
Quality :
Do it right the first time, total quality control
Effectiveness:
Work precisely and thoroughly for effectiveness
Service:
Quick response, On time delivery and Excellent service
Team work:
Complete teamwork, including sales team, Marketing team, engineering team, R&D team, Manufacturing team, logistics team. All is for supporting and servicing a satisfy service for customers.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.