Oilfield Swab Cups

Product Description: Royal Way swab cups are used on swabbing assemblies to lift well fluids. This page focuses on the 7-inch V type size reference, with 4.5-inch and 5.5-inch alternatives listed below. Match the actual cup dimensions and core to the swab tool and measured bore before ordering. Key Features: 1.V type cup selection for the specified wellbore cleanout assembly 2.Rubber compound and core construction specified for the operating cycle 3.Temperature limits

Steel-Core TA Swab Cups — Nominal Tubing Size and Cup Dimensions Shanghai Qinuo Industry offers the popular Guiberson* profile TA Swab Cup in both nitrile and frac fluid rubber compound. The cup has either an aluminum or steel bushing with multiple upturned lips with profile and load suitability confirmed against actual tubing bore, mandrel and fluid conditions. Suspended sand and restrictions affect wear and movement. Nom. OD (inch) Core and Description Cup OD Cup ID 2-3/8"

2.875-inch Aluminum-Core Rubber Swab Cups: Size Reference and Assembly Fit Product Introduction Shanghai Qinuo offers swabbing cups for oilfield fluid removal. For this aluminum-core listing, identify whether 2.875 inches denotes the tubing reference or the finished cup diameter. Confirm cup OD, ID, height and aluminum-bushing dimensions from the drawing. Select a rubber compound matched to the fluid and temperature and specify the required cup profile and load range. Provide

RTL Rubber Swab Cups with Sleeve Core: Mandrel and Bushing Fit Product Introduction Shanghai Qinuo offers swabbing cups for oilfield fluid removal. For this RTL sleeve-core reference, check the sleeve bore, length, cup OD, ID and height against the swab mandrel drawing. Specify the sleeve material and required profile before selecting a suitable NBR, HNBR or FKM compound using the fluid composition, additives and operating temperature. Provide the actual tubing bore,

V Series Swab Cups for Sandy-Fluid Swabbing and Dimensional Matching Shanghai Qinuo supplies V-series swab cups for oilfield fluid lifting. The upturned-lip profile is considered for suspended-sand applications. Select light-duty or heavy-duty construction against the actual tubing bore, mandrel and lifting conditions; cup count and load release depend on the complete tool assembly. The steel-core options in the table below must be matched to the requested drawing. For frac

TA Type Rubber Swab Cups for 2' 2-1/2' 2-7/8' 3-1/2' Tubing High-Efficiency Fluid Lifting Solutions for Oilfield Services TA type rubber swab cups are replacement fluid-lifting components for well intervention and cleanout. Match the cup profile to the actual tubing bore and mandrel. Fluid recovery depends on cup fit, condition, tool arrangement and the operating program. The TA type range lists steel or aluminum insert options and size labels including 2, 2-1/2, 2-7/8 and 3

TA Style Rubber Swab Cups for Efficient Fluid Lifting High-Performance Oilfield Swabbing Solutions TA style rubber swab cups are replacement fluid-lifting components for oilfield swabbing. The existing range lists steel or aluminum insert options. Match the selected cup to the actual tubing bore, mandrel and operating duty before ordering. Use TA cups within the approved workover or fluid-recovery program. Cup fit, condition and the fluid column influence recovery and

Swab Cup For Oilfield Product Description The Rubber Swab Cup is a high-performance sealing component designed for swabbing operations in the oil and gas industry. NBR and HNBR are compound options to evaluate against the actual well fluid, temperature and swabbing duty. Resistance to wear and hydrocarbons depends on the selected formulation and operating conditions. Key Features: Superior sealing for efficient fluid recovery in wellbore cleanouts Compound and reinforcement

Custom-Color TA Rubber Swab Cups: Compound and Wear-Service Selection Custom-color TA swab cups combine a rubber profile with a steel or aluminum core for medium-load well-fluid lifting. Specify the required color by sample or reference together with the compound and hardness requirements. A color match does not establish abrasion resistance or fluid compatibility. For wear-related service, include sand content, tubing condition, produced-fluid composition and operating

Product Description These 9-inch NBR rubber discs are surface pipe wipers for removing adhering drilling mud and residue from the outside of tubulars during tripping operations. Review the center opening, pipe-body diameter, tool-joint passage and support arrangement for the installed equipment. Mud recovery depends on the complete collection system and operating conditions. The wiper is not a downhole MWD/LWD protective component or a well-pressure barrier. Key Features

TA-Type Rubber Swab Cups for Oil-Service Tubing Enquiries TA / Type A swab cups are listed for medium-load tubing swabbing. Select the cup profile, rubber compound and bushing for the actual tubing bore and swab tool rather than assuming one cup suits every well condition. TA Cup Oil-Service Selection: Match the Compound to the Actual Fluid Order detail Required specification TA profile and tubing 2-3/8, 2-7/8 and 3-1/2 inch are tubing references; confirm actual bore and cup

Custom Swab Cup Enquiries: Cup Profile and Metal Insert Specification Royal Way supplies custom rubber swab cup enquiries for equipment-defined oilfield swabbing. Specify the cup profile and metal insert arrangement from the approved drawing. Select the compound for the actual fluid and temperatures. The cup is not a pressure-control device and has no independent 10,000 psi working-pressure rating. The existing catalogue introduces TA, V and MV profiles and nominal tubing

V Series Swab Cup for Sand-Laden Fluids: The V Series swab cup is described with an upturned lip profile for swabbing fluids containing suspended sand. Light-duty and heavy-duty variants require separate selection by cup construction and operating load. Confirm the lip geometry and support arrangement for the actual part before choosing a replacement. For sand-laden service, specify solids concentration, particle size, fluid chemistry and retrieval conditions. Nitrile or a

2-7/8-inch Steel-Core TA Swab Cups for Heavy-Wall Tubing References For steel-core replacement cups in heavy-wall tubing, confirm the actual bore and specify the TA cup profile with the required mandrel fit. The retained 2-7/8-inch steel-core catalog row gives a 2.431-inch cup OD and 1.370-inch cup ID; confirm these dimensions and cup height against the replacement drawing. The specified steel bushing must match the cup specification. Provide fluid composition, solids content

Product Introduction Optimized Fluid Lifting with 2 1/2" SV Type Swab Cups The 2 1/2 inch SV type swab cup is a replacement component for oilfield fluid-lifting assemblies. This configuration is identified by its nominal size and flexible lip profile. For sand-laden-fluid service, match the cup dimensions and core seating to the installed tool, then specify the fluid, solids content and operating conditions for compound selection. Technical Specifications Product Type SV Type

3-1/2-Inch Tubing Swab Cup Enquiries: Cup Diameter and Bore Royal Way supplies replacement swab cup enquiries for the 3-1/2-inch nominal tubing reference. Confirm the actual tubing inside diameter, cup profile and mandrel fit. Select the NBR or FKM grade for the fluid and temperatures. A cup is not a pressure-control device and has no independent 10,000 psi working-pressure rating. The existing range introduces TA, V and MV profiles. Confirm the required lip geometry, bushing

Product Description: The 2-inch TA type rubber swab cup is offered for well-servicing enquiries requiring a specified rubber compound and bushing construction. Nitrile and frac-fluid compound options are selected against the actual fluid formulation. TA, V and MV profiles require separate dimensional approval; a profile reference does not confirm interchangeability. 2" TA Type Swab Cup Specifications: Product Name: Swab Cup Type: TA Type Sample: Available Pressure requirement

Product Description: This 2-inch TA type steel-core swab cup is offered for replacement enquiries involving demanding downhole service. Approve the steel-core and rubber profile drawing against the mandrel and bore. Specify fluid composition, solids exposure, temperature and operating cycle so the compound and assembly can be reviewed for the required duty. 2" TA Type Swab Cup Specifications: Product Name: Swab Cup Type: TA Type Sample: Available Pressure requirement: Confirm

Product Description: Royal Way V-type oilfield swab cups are supplied for replacement in the specified swab assembly. Confirm the cup profile and mandrel fit against the drawing or sample before procurement. Operating limits depend on the selected rubber compound, cup geometry, lifting load and complete swab assembly. Specify the intended temperature and service conditions when confirming the replacement cup. For the listed NBR rubber option, review compatibility against the

Product Description: Royal Way V-type swab cups are selected for the intended swab mandrel and tubing bore. Confirm finished cup dimensions, profile and the required lifting load before replacing the existing cup. Request a product sample for dimensional and fit review when needed. Provide the drawing or mandrel dimensions with the inquiry; sample terms and shipping arrangements are confirmed with the quotation. For well-fluid lifting in a specified completion or workover