Zettlex IncOder CORE Inductive Rotary Encoder Compact Lightweight
Zettlex IncOder CORE Inductive Rotary Encoder Compact Lightweight
Absolute, Lightweight, Robust.
IncOder CORE is a non-contact, lightweight absolute rotary inductive encoder fully contained in a printed circuit board kit. The ergonomic hollow bore design is suited for integration into rotary actuators. The position sensor utilizes a unique field-proven inductive technique, delivering highly repeatable, reliable, temperature-stable measurement performance. The angle sensor can be installed simply by mounting the rotor and stator pair into the host assembly by means of M2 mounting holes. With modest installation tolerances, a programmable zero set and no calibration required, the sensor can be screwed (and optionally doweled) in place for quick, practical, and reliable setup.
Inductive Rotary Encoder Features
• Compact, Lightweight PCB construction
• No precision installation tolerances
• No calibration
• Ergonomic hollow bore design
• Highly repeatable position feedback
• Insensitive to contamination
Inductive Rotary Encoder Benefits
• Reduced system weight and design envelope
• Simple installation
• Reduced OEM production time and cost
• Optimized for use in rotary actuators
• Reliable feedback in demanding applications
•Robust position measurement
| Specification |
IncOder CORE |
| Rotor OD (screw hole PCD) |
35.6 mm (36mm) |
| Stator OD (screw hole PCD) |
44 mm (56.8 mm) |
| ID |
10.4 mm |
| Height |
13.1 mm |
| Installation |
0.5 ± 0.2 mm Gap 0.2 mm Max Radial Offset |
| Communication Protocols |
SSI, BiSS-C, SPI, Async Serial |
| Resolution |
10 - 17 bits |
| Accuracy |
0.1° |
| Repeatability |
± 1 LSB |
| Max Speed |
10,000 rpm |
| Supply Voltage |
5-12 VDC |
| Current Consumption |
<100 mA |
| Measurement Update Rate |
10 kHz |
| Operating Temperature |
-20 to +85 °C |
| Temperature coefficient |
<1 ppm |
| Mass |
2.8g (Target)
11.8g (Stator) |
| Connector |
10-way Molex PicoClasp |
Inductive Rotary Encoder Applications – Marine Satcom
![]()
Inductive Rotary Encoder Applications – Airborne Satcom
Inductive Rotary Encoder Applications – Mobile Robotics
FAQ:
Q1. Can I have a sample order?
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 5-7 workdays.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: By express or air or sea .
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%
Q9:How is your quality control?
A: Our professional QC will check the quality during production and carry out quality test before shipment.
