Hammer Union Seal

Product Description Royal Way® supplies hammer union seals for specified oilfield flow-line connections. Select the profile, compound and backing configuration against the union drawing and operating duty. The catalogue includes Figure 1502, 602, 1002, 2002, and 2202 union references; confirm the manufacturer, size and seal seat before ordering. Working and test pressure limits require evidence for the exact complete union assembly. Available in Nitrile (NBR) for standard

3-inch Figure 1502 Brass-Backed Buna/NBR Hammer Union Seal Sizes: This configuration: 3-inch nominal connection; actual seal and backing dimensions per drawing. Other sizes require separate enquiry. Types: Buna/NBR with specified brass backing; stainless-backed options require separate confirmation Material Buna/NBR compound and hardness per specification; HNBR/FKM options reviewed separately. Hammer Union Seal This listing focuses on a 3-inch nominal Figure 1502 hammer union

HNBR Rubber 3" Hammer Union Seal With Brass Back Up Anti - Extrusion Ring Product Description Hammer Union Seal This listing concerns a 3-inch nominal hammer union seal with HNBR rubber and brass backing. Confirm the union manufacturer, figure number and matching seal drawing before ordering. The rubber profile and backing geometry must fit the specified groove; a 3-inch connection designation does not give the actual seal dimensions. Specify the exact HNBR compound and Shore

2-inch Figure 1502 purple TPU/polyurethane replacement seal ringThis polyurethane seal ring is selected for the identified nominal 2-inch union connection. Confirm the equipment manufacturer, Figure 1502 part drawing and actual ring dimensions before ordering. Purple colour is an order specification and does not establish the material grade, Shore A hardness or service pressure. Nominal 2 inches for this part enquiry; 3- and 4-inch catalogue versions require separate drawing

Brass-backed seal rings for specified 2-inch hammer union hardware Hammer Union Seal Brass-backed hammer union seal rings are replacement sealing components for the specified union hardware. This listing concerns the 2-inch configuration; match the union manufacturer, figure number and seal profile before ordering. The brass support and rubber sealing portion must match the approved parts drawing. Hammer unions use mating ends and a hammer nut to assemble the connection. The

Hammer Union Seal Replacement — Mating Groove and Backing Selection A replacement seal must match the union figure, nominal connection size and actual seal groove. Provide the hardware maker or drawing, the removed seal dimensions and the specified material so that the lip profile and any metal backing can be checked together. Hammer union hardware and the replaceable seal are distinct parts. References to figures 602, 1002, 1502, 2002 or 2202 require figure-specific

Buna / HNBR / FKM 1502 Weco Seal Ring , Metal Reinforced Seal Rings Metal-reinforced hammer union seal rings combine a rubber sealing element with the specified backing configuration for the identified Figure 1502 connection. Buna-N (NBR), HNBR and FKM are separate compound selections. Provide the union manufacturer, nominal connection size and part drawing, including the backing dimensions and rubber profile, when ordering a replacement for a WECO-referenced union. For a

2, 3 and 4-Inch Figure 1502 FKM Hammer Union Seals — Compound-Specific Enquiry The hammer union seal is a sealing component installed within the matching union hardware; it is not the complete threaded or welded connection. Shanghai Qinuo can supply you best Hammer Union seal in different figs like 602, 1002, 1502, 2002 and 2202. Available size : 1", 2", 3", 4" and 5" Material: This enquiry concerns Figure 1502 FKM fluoroelastomer replacements in nominal 2, 3 and 4-inch

2" Buna/ HNBR/FKM Hammer union seals Product Description Hammer Union Seal Nominal 2-inch hammer union replacement seals can be specified in Buna-N/NBR, HNBR or FKM with a separately matched brass or stainless steel backing configuration. Match the rubber lip section and backing dimensions to the union manufacturer and figure drawing. Specify the ring inside diameter, outside diameter and height; nominal 2-inch line size does not define the actual seal dimensions. For a

1502 hammer union seals 80 Shore A 2" FKM hammer union seals ring Nominal 2-inch Figure 1502 FKM hammer union replacement rings are specified with an 80 Shore A hardness requirement for the selected compound. Confirm the hardness tolerance and test method in the approved part specification, together with the manufacturer-specific lip section, inside diameter, outside diameter and ring height. The nominal connection size does not define the actual seal dimensions. For

Product Description A hammer union comprises of a thread end, a nut end and a hammer nut which, when cinched up, compresses a composite seal assembly thereby preventing leakage. The seal assembly comprises a metal insert of a size to pass into the seal groove of conventional hammer unions and a small seal acting between the insert, the thread end and the nut end. The small seal is conveniently an O-ring or a Hammer Union Seal (Lip Seal) and is of a size that is compressed

Hammer union replacement seals require a defined part specification before sample approval or production ordering. This listing focuses on agreeing the inspection information for a replacement ring: identify the union and drawing, compound, hardness, profile dimensions and any required backing components. The seal is a component of the metal connection hardware. Provide the manufacturer, figure, nominal size and part number. Lip rings, O-rings and metal-backed constructions

80-90 Shore A Brass back-up Green color Buna hammer union seals Product Description Hammer Union Seal Qinuo produced a full line of Hammer Union Seals for use on flow lines. These Hammer union Seals are designed to seal on a Figure 1502 unions with a 15,000 PSI connection reference for suitable standard service; confirm the exact union rating and seal specification. Any assembly test pressure requires a documented test requirement and result. our seals also produced a line of

Product Description Buna-N hammer union rings use nitrile rubber (NBR) as the sealing material for the specified union connection. The ring seals against the mating recess when the union is correctly assembled. Confirm the equipment manufacturer, union figure and ring cross-section for replacement orders; a hammer union ring is selected by its connection geometry, rather than by the general term oil seal. For a Buna replacement ring, provide the fluid composition, operating

Figure 1502 Hammer Union Seals and Separately Specified Swivel Joint Packing Hammer Union seals: Figure 1502 hammer union seals and swivel joint packing require separate part identification. This listing focuses on maintenance enquiries that mention both components: identify the union connection seal and the swivel packing as separate items on the equipment parts list, with the manufacturer, model, nominal size and part number or drawing for each. For the hammer union ring,

Professional Brass Backed Nitrile Rubber Seal For Hammer Union Black Color Product Description Hammer Union Seal Black brass-backed NBR seal rings are replacement components for the identified hammer union connection. This listing focuses on confirming brass backing dimensions and condition alongside the rubber profile. Black color alone does not identify the NBR compound or service suitability. Specify the union manufacturer, figure, nominal connection size and seal part

Hammer Union Connection Seals With or Without Specified Metal Backing Hammer union seal rings may be rubber-only or include a specified metal backing. This listing focuses on clarifying the term skeleton in a replacement enquiry: state whether it means brass backing, stainless steel backing or another insert, and provide the component drawing rather than ordering by that term alone. The seal ring is a component of the hammer union connection, while threaded or welded mating

Blue-colour hammer union replacement rings are specified by the actual seal profile, compound and matching union recess. Colour can identify an agreed order configuration, but it does not establish heat resistance, hardness or fluid compatibility. Provide the union manufacturer, figure number and nominal connection size together with the part drawing when ordering. For elevated-temperature service, provide normal and peak operating temperatures, exposure duration and fluid

Product Description Hammer Union Seal Replacement rings for hammer unions should be ordered using the union identity and the rubber compound specification. This listing focuses on clarifying material designations: Buna/NBR, FKM and HNBR are separate material families, while an HSN designation should be resolved to the supplier's exact compound specification before procurement. Provide the manufacturer, figure number, nominal connection size and seal part number or drawing.

Industrial Hammer Union Replacement Seals with Specified Metal Support Other seal enquiries; confirm material, figure and drawing for each item: 1" HAMMER UNION LIP SEAL RING, BUNA 1-1/2" HAMMER UNION LIP SEAL RING, BUNA 2" HAMMER UNION LIP SEAL RING, BUNA 3" HAMMER UNION LIP SEAL RING, BUNA 1" HAMMER UNION LIP SEAL RING, 1-1/2" HAMMER UNION LIP SEAL RING, 2" HAMMER UNION LIP SEAL RING, 3" HAMMER UNION LIP SEAL RING, 2" HAMMER UNION SEAL RING, BUNA W/