Hammer Union Seal

Buna/NBR hammer union sealing rings for specified union hardware Product Description Hammer Union Seal Buna/NBR hammer union rings are replacement rubber seals for the specified union connection. Hammer unions use mating ends and a hammer nut; the required lip seal or O-ring profile depends on the manufacturer, figure number and nominal size. Match the seal to the approved parts drawing before ordering. For this Buna-material enquiry, confirm the exact NBR compound, Shore A

Weco Fig 602/1002/1502 Hammer Union Seal for oil drilling industry Product description Hammer union seals are used in the connections between flexible hoses or pipes used in the oil drilling industry. The seal provides a critical fluid tight connection within the union hardware. Hammer unions consist of a thread end, a nut end, and a hammer nut that when tightened seal the assembly with the assistance of an elastomer seal. The retaining lip profile must match the specified

SHQN Seal Products 1502/1002 HNBR NBR FKM 1.5" Hammer Union seals Hammer union seals products data sheet Available sizes 1" 1.5" 2" 3" 4" Available material NBR HNBR FKM or with Brass or SS backside Hardness 80 or 90 Shore A options by approved elastomer specification; target and tolerance to confirm Types hammer union seals More hammer union seals detail pictures for reference Hammer union seals: Hammer Union Seals are used in hammer union-style pipe connections to

80 90 durometer Nitrile Seals Ring for Oil extraction industry Hammer Union Seal This nitrile hammer union seal listing focuses on specifying the required rubber hardness with the compound and seal profile. The original 80/90 durometer designation should be confirmed as a specific Shore A requirement for the selected part; it is not a pressure rating or a guarantee of interchangeability. Buna/NBR seals, FKM and HNBR compounds, brass-backed and stainless-backed configurations

Product Description Hammer union lip seals for fracturing-pump flow-line connections are replacement components inside the identified union hardware. For a Figure 1502 or WECO-referenced connection, confirm the equipment manufacturer, nominal line size and seal drawing before ordering. The rubber profile and any backing must match the mating recess; the seal is separate from the pump fluid-end packing and the complete union fitting. For pump discharge-line maintenance,

Hammer Union Seal For Oil/ Gas Industry Buna Nitrile FKM HSN Product Description Hammer union seals are replacement components in specified oilfield pipe or hose connections. This listing focuses on selecting Buna/NBR, FKM or HNBR compounds for the actual oil and gas service conditions; a material family name does not establish compatibility with every fluid. Hammer unions use mating ends and a hammer nut to assemble the connection. The lip seal or O-ring profile depends on

Hammer union replacement seals should be identified from the original part drawing or equipment record before using a worn sample for comparison. This listing focuses on sample-based enquiries: provide the union identity and photographs of the complete seal profile, together with dimensions and any metal backing. A composite insert arrangement applies only where the matching design specifies it. The seal ring is a component of the threaded or welded union hardware. Record the

Hammer Union Replacement Seals for Specified Rotary-Drilling Flow-Line Connections Hammer Union Seal Replacement hammer union seals for rotary-drilling flow lines should be specified for the actual connection and circulating fluid. This listing focuses on enquiries that include drilling-fluid composition, additives and operating temperature, so the selected rubber compound can be reviewed against the service conditions. Provide the union manufacturer, figure, nominal

4-Inch Figure 1502 NBR Hammer Union Oil Seal — Oilfield Replacement Product Description A hammer union comprises of a thread end, a nut end and a hammer nut which, when cinched up, compresses a composite seal assembly thereby preventing leakage. The seal assembly comprises a metal insert of a size to pass into the seal groove of conventional hammer unions and a small seal acting between the insert, the thread end and the nut end. The small seal is conveniently an O-ring or a

Hammer union replacement seals are ordered as identified rubber rings or specified rubber-and-backing configurations. This listing focuses on defining the supply scope before purchase: state whether the enquiry requires the rubber ring alone, a matching backed assembly or separately supplied backing components. The sealing ring is separate from the complete metal union connection. Provide the manufacturer, figure, nominal connection size and seal drawing or part number. Lip

Product Description HUS001 NBR hammer union seals are listed for nominal 2-, 3- and 4-inch union connections, with brass or stainless steel backing specified for the selected part. The rubber ring and backing must match the seal recess in the identified union. Provide the equipment manufacturer, figure number and part drawing when ordering a replacement; HUS001 is a catalogue reference and does not by itself establish fit across different union designs. The seal is a

Product Description A hammer union uses mating ends and a hammer nut to assemble a pipe or hose connection. The replacement rubber seal is a component of that assembly. Where a metal insert or backing ring is specified, its dimensions and relationship to the elastomer must match the equipment parts drawing; not every union uses the same composite seal arrangement. This listing focuses on identifying the complete seal configuration: lip seal or O-ring profile, rubber compound

Rubber Hammer Union Replacement Seals for Specified Groove and Temperature Product Description A hammer union comprises of a thread end, a nut end and a hammer nut which, when cinched up, compresses a composite seal assembly thereby preventing leakage. The seal assembly comprises a metal insert of a size to pass into the seal groove of conventional hammer unions and a small seal acting between the insert, the thread end and the nut end. The small seal is conveniently an O

Hammer Union Replacement Metal-Backed Seal Rings for Flow Line & Oil Field Hammer Union Seal Metal-backed replacement seal rings combine the specified rubber profile with a matching brass or stainless steel backing configuration. This listing focuses on selecting the backing and elastomer together for the identified hammer union; the two metal options are not assumed interchangeable. Provide the union manufacturer, figure, nominal size and seal part number or drawing,

Product Description A hammer union is the complete pipe connection; this product is a replacement lip seal for the specified union assembly. Match the seal profile, dimensions and any metal backup to the original manufacturer drawing. An O-ring or composite seal arrangement should not be treated as interchangeable with a lip seal without confirmation. Shanghai Qinuo supplies replacement hammer union seals for confirmed figure-and-size configurations. The existing range lists

80 Duro Nitrile Hammer Union Seal Ring With Brass / Stainless Steel Ring Product Description Hammer Union Seal Specified NBR compound; other material options require separate confirmation This configuration: 80 Shore A NBR, with tolerance per agreed specification Brass or stainless steel backing per the matching union drawing This 80 Shore A nitrile hammer union seal ring is specified with a matching brass or stainless steel backing configuration. Confirm the NBR compound

Hammer union replacement seals must match the connection design rather than nominal pipe size alone. This listing focuses on clarifying line-pipe size references in a seal enquiry: provide the union manufacturer, figure and part number or drawing together with the nominal connection size. Composite insert arrangements apply only where specified by that design. The ring is a sealing component of the union hardware, rather than a complete threaded or welded connection. Confirm

4 Inch HNBR Hammer Union Replacement Seal Enquiries Product Description Hammer union seals are used in the connections between flexible hoses or pipes used in the oil drilling industry. The seal provides a critical fluid tight connection within the union hardware. Hammer unions consist of a thread end, a nut end, and a hammer nut that when tightened seal the assembly with the assistance of an elastomer seal. Match the lip profile and retention features to the original groove

Hammer Union Seals With or Without Metal Backing A hammer union assembly uses mating union components and the seal profile specified for that hardware. For HUS001 replacement enquiries, identify whether the required seal is unbacked rubber or contains a metal insert. Metal backing changes the construction and groove fit; it is not an interchangeable addition to every rubber seal. Provide the insert material, dimensions and rubber-to-metal construction on the drawing. The seal

Product Description Purple Buna-N hammer union seals with a brass extrusion ring combine a specified nitrile rubber sealing profile with a metal support component for the matched union recess. The brass ring and rubber element must be selected as the correct part configuration. Provide the union manufacturer, figure number and seal drawing when requesting a replacement, including the backing outside diameter, inside diameter and thickness. Custom purple colouring can help