Heat-stable Alpha-Amylase HS-1200

NON-GMO Food Grade Powder Liquefaction Amylase

Halal & Kosher Certified 

• An endoamylase that can rapidly decrease the viscosity of a gelatinous starch solution by randomly hydrolyzing starch, glycogen and its degradation products within the alpha-D-1, 4 glucosidic bonds to produce soluble dextrins and oligosaccharides.
• Produced from non-genetic modified strains of Bacillus licheniformis through submerged fermentation and refining extraction processes
• A very robust alpha-amylase with superior thermal and pH stability.
• It is generally applicable to the production of starch sugar, monosodium glutamate, beer, brewing, etc.

EFFECT OF pH

• HS-1200 is active over a wide pH range, depending on the application. For maximum activity, the optimal pH for HS-1200 is 5.8 to 6.4.
• At a temperature of 25°C (77°F), the stable pH range for HS-1200 is 5.0 to 10.0.
• The exact pH optimum depends on actual processing conditions, such as temperature, substrate concentration and reaction time.

EFFECT OF TEMPERATURE

• Optimum temperature of HS-1200 for interval liquefaction is above 90°C (194°F).
• HS-1200 can liquefy starch substrates promptly at 95 to 97°C (203～207°F) and remains highly active at 100°C (212°F).
• This product demonstrates exceptional thermal stability at temperatures up to 105～110°C (221～230°F), maintains its stability for 5 to 7 minutes, continues liquefying rapidly and completely.
• At temperatures above 105°C (221°F), the enzyme stability decreases rapidly.
• The exact temperature optimum will depend on many process variables, including pH, substrate concentration, and time.

CONCENTRATION OF CALCIUM

• The presence of calcium increases the thermal stability of HS-1200. A very low calcium concentration 50 to 70 ppm (dry solids basis) is sufficient to ensure the enzyme stability.

INHIBITORS

• Copper, titanium, and cobalt ions are moderate inhibitors for HS-1200 whereas aluminum, lead and zinc ions act as strong inhibitors.

TYPICAL USAGE

• In general, first adjust the pH to 5.8-6.4 and then add calcium 50 to 70 ppm (dry solids basis) before adding HS-1200.
• Calcium is not needed when extremely hard water (> 10 German degrees) is used. After the enzyme is added, heat the slurry to liquefy.

DOSAGE

• Dosage of HS-1200 depends on the actual situation such as starch, substrate concentration and other processing conditions.
• To optimize the dosage, it is recommended to conduct a number of liquefaction trials prior to routine use of this product.

STORAGE & SHELF-LIFE

• Typical shelf-life  is six months provided being stored below 25°C (77°F) in its original packaging, sealed and unopened, protected from the sunlight.
• Its shelf-life will be eighteen months if it is stored properly at 0～10°C (32～50°F). Prolonged storage and/or adverse conditions such as higher temperatures may lead to a higher dosage requirement.

SAFETY & ENZYME HANDLING

• Inhalation of enzyme dust and mists should be avoided. In case of contact with skins or eyes, promptly rinse with water for at least 15 minutes.
• For detailed handling information, please refer to the Material Safety Data Sheet.